2011 Ford F-550 Utility work truck w/compressor, welder, and crane.
2011 Ford F-550 CAB and Chassis Utility Work Truck, 6.7L V8 OHV 16V DIESEL. Automatic Transmission 2WD GVWR 18,000 lbs. A/C blows cold and the Heater blows hot. This well used work truck aged out of our fleet and was retired a couple months ago. Miles: 96,606 Hours: 4,484 Specialty Equipment -Warning Traffic advisory lights -Body Mounted Vise -Air Compressor -Lincoln 305G Ranger Welder (305 hours) -Auto Crane 3203 Capacity 3,200 lbs. Please not the following -The compressor has a large air leak from the fittings and will not build pressure -The auto crane down function requires you to press on the solenoid. (see image) There is an internal failure in the distribution block. -The cab mounting bushing in the passenger rear corner is completely blown out. The cab knocks while driving over bumps. -The rear tires are from 2016 and there is dry cracking evident on all the tires. -One of the tires is damaged and the rim is bent. See image. -One of the locks for the cabinet is not working, but the cabinet opens (see image) -The Driver's corner of the utility bed is cracking near the mount hardware. Vehicle sold as is. No other known issues
Sold lots with the same make and model. Too few matched the year.
Market values by make and model